Replacing The Fuser Kit - Lexmark Optra C710 User Manual

Replacing the
fuser kit
Caution!
The fuser may be
hot. Allow the fuser to cool
before touching.
Release button
Power switch
Your printer monitors the life of your fuser. When the
fuser in your printer is nearing the end of its life, the
printer will display
87 Fuser Exhausted
play. This message indicates it is time for you to replace
the fuser kit. The fuser kit consists of the fuser unit, and an
air filter.
To remove the fuser:
1
Place the printer power switch to off (O).
2
Unplug the printer or optional device power cord
from the outlet.
3
Press the fuser cover release button.
4
Lift the fuser cover.
Chapter 7: Replacing the fuser kit
on the printer dis-
131