Handling Paper; Paper Sources And Output Bins - Lexmark Optra C710 User Manual

Paper sources
and output bins
Multipurpose
feeder
250-sheet standard tray
250-sheet optional trays
6
Top output bin

Handling paper

Your printer comes equipped with two standard paper sources: a
250-sheet paper tray and the 50-sheet multipurpose feeder. You
can load paper in all the paper trays. Transparencies can only be
loaded in the multipurpose feeder and tray 1. You can load
paper, transparencies, labels, or envelopes in the multipurpose
feeder.
For additional paper capacity, you can attach an optional drawer
unit with two 250-sheet trays to your printer. When linked, you
can then effectively create a single 800-sheet source. See
page 109 for more information about tray linking. Refer to the
Setup Guide for information about installing the optional drawer
unit.
The table on page 96 details the types and quantities of media
you can load in each of the printer's paper sources. For more
information about selecting specific media, see "Media guide-
lines" on page 98.
Printed output is placed face down in the output bin located on
the top of your printer.
Chapter 6: Paper sources and output bins
95