Letterhead - Lexmark Optra C710 User Manual

Letterhead

Refer to the illustrations at the left to orient A4 or letter size pre-
printed paper in the paper trays or the multipurpose feeder.
Do not exceed the maximum stack height indicated on the inside
of the paper tray.
Preprinted papers such as letterhead must be able to withstand
temperatures up to 195°C (383°F) without melting or releasing
hazardous emissions. Use inks that are not affected by the resin
in toner or the silicone in the fuser. Inks that are oxidation-set or
oil-based should meet these requirements. Latex inks may melt.
If you're loading preprinted letterhead in the trays, place the top
of the page at the front of the tray with the letterhead up. If you
are loading preprinted letterhead in the multipurpose feeder,
place the top of the page toward the printer with the letterhead
down.
Stack height indicator
99
Chapter 6: Media guidelines