Paper Feed; Printing In Wrong Position; Paper Stopping, Jamming, Or Feeding Multiple Sheets - Lexmark E210 - Optra B/W Laser Printer Service Manual

4510-001

Paper Feed

Printing in wrong position

Printing begins at the
Step wrong position on
the paper
1 Check for obstructions
in the input tray that
could cause incorrect
feeding. Are there
obstructions?
2 Check the paper
present actuator for
binds. Is it binding?

Paper stopping, jamming, or feeding multiple sheets

Paper stops or jams
at various points in
Step
the printer or feeds
multiple sheets
1 Does the paper exit the
input tray? See
Path Jam 0" on
page
2 Does the paper stop
just after exiting input
tray? See
Jam 1" on page
3 Is the paper jammed in
front of or just inside
the fuser? See
Path Jam 2" on
page
4 Check for obstructions
in the input tray. Are
there obstructions?
"Paper
2-9.
"Paper Path
2-9.
"Paper
2-10.
Yes
Remove the
obstructions
Correct the
binding problem
Yes
Go to step 2
Go to step 8
Go to step 9
Remove
obstructions
No
Go to step 2
Replace the paper
present actuator
No
Go to step 4
Go to step 3
Go to step 7
Go to step 5
Diagnostic Aids
2-7