Set Date/Time Menu - Lexmark E460dw User Manual

Menu item
Configure Log
Enable Audit
Yes
No
Enable Remote Syslog
No
Yes
Remote Syslog Facility
0–23
Severity of events to log
0–7

Set Date/Time menu

Menu item
View Date/Time
Set Date/Time
Time Zone
<list of time zones>
Observe DST
On
Off
Description
Specifies whether and how the audit logs of print jobs are created:
•
Enable Audit determines if the printer records events in the secure audit log and
in the remote syslog.
•
Enable Remote Syslog determines if the printer sends logged events to a remote
server.
•
Remote Syslog Facility determines the facility value that the printer uses when
sending events to the remote syslog server.
•
"Severity of events to log" specifies how critical a logged event is. With this log
activated, the printer logs each event with a severity value equal to or less than
the setting value.
0 is Emergency
1 is Alert
2 is Critical
3 is Error
4 is Warning
5 is Notice
6 is Informational
7 is Debug
Notes:
•
Yes is the factory default setting for Enable Audit.
•
No is the factory default setting for Enable Remote Syslog. If Enable Audit is set
to No, then no records are sent to the remote syslog even if Enable Remote
Syslog is set to Yes.
•
4 - Security is the factory default setting for Remote Syslog Facility.
•
4 is the factory default setting for Severity of events to log.
Description
Lets you view the current date and time settings for the printer. The format for the
date and time is: YYYY-MM-DD HH:MM:
YYYY is the four-digit year
MM is a two-digit month
DD is a two-digit date
HH is a two-digit hour
MM is a two-digit minute
Lets you enter the date and time
Note: Date/Time is set in YYYY-MM-DD HH:MM format.
Lets you select the time zone
Note: GMT is the factory default setting.
Sets the printer to use the applicable Daylight Saving Time (DST) start and end times
associated with the printer Time Zone setting.
Note: On is the factory default setting.
Understanding printer menus
104