Quality Menu - Lexmark E260d Series User Manual

Menu item
N-up Border
None
Solid

Quality menu

Menu item
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both Directions
Isolated
Toner Darkness
1–10
Enhance Fine Lines
Off
On
Gray Correction
Auto
Off
Brightness
-6 to +6
Description
Prints a border around each page image when using N-up (pages-sides)
Note: None is the factory default setting.
Description
Specifies the printed output resolution
Note: 600 dpi is the factory default setting. The printer driver default is 2400 Image Q.
Enhances the printed quality of small fonts and graphics
Notes:
•
Off is the factory default setting.
•
Fonts applies this setting only to text.
•
Horizontally darkens horizontal lines of text and images.
•
Vertically darkens vertical lines of text and images.
•
Both Directions darkens horizontal and vertical lines on text and images.
•
Isolated darkens isolated text and images.
Lightens or darkens the printed output
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in a browser window.
Adjusts the gray value of printed output
Note: Auto is the factory default setting.
Adjusts or darkens printed output and conserves toner
Notes:
•
0 is the factory default setting.
•
A negative value will darken text, images, and graphics. A positive value will
lighten them and conserve toner.
Understanding printer menus
79