Solving Option Problems; Option Does Not Operate Correctly Or Quits After It Is Installed; Drawers - Lexmark E260d Series User Manual

M
AKE SURE THE PRINTER HAS ENOUGH MEMORY
Add printer memory.

Solving option problems

Option does not operate correctly or quits after it is installed

These are possible solutions. Try one or more of the following:
R
ESET THE PRINTER
Turn the printer off, wait for about 10 seconds, and then turn the printer on.
C
HECK TO SEE IF THE OPTION IS CONNECTED TO THE PRINTER
1
Turn the printer off.
2
Unplug the printer from the wall outlet.
3
Check the connection between the option and the printer.
M
AKE SURE THE OPTION IS INSTALLED
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option is not
listed, reinstall it.
M
AKE SURE THE OPTION IS SELECTED
From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the
Chooser.

Drawers

These are possible solutions. Try one or more of the following:
M
AKE SURE THE PAPER IS LOADED CORRECTLY
1
Pull the tray completely out.
2
Check for paper jams or misfeeds.
3
Make sure the guides are aligned against the edges of the paper.
4
Insert the tray.
R
ESET THE PRINTER
Turn the printer off, wait about 10 seconds, and then turn the printer on.
Troubleshooting
112