Assembling Fuel Bed And Commissioning; Assembling The Ceramics And Fuel Bed - Flavel Caress traditional Installation, Maintenance & User Instructions

ASSEMBLING FUEL BED AND COMMISSIONING

3.1

ASSEMBLING THE CERAMICS AND FUEL BED

3.1.1 Place the ribbed ceramic fuelbed base on top of the fuelbed support
and pull fully forwards to the burner. Make sure that the fuelbed
base is located centrally in the fire box. Ensure that the fuelbed
base is fitted fully down onto the fuel bed support and is not
lodged on the burner. See figure 14 below.
Fig. 14
3.1.2 Position the two halves of the front ceramic (L/H & R/H) on the locating
channel in the front ceramic, ensuring it is located onto the lip on the
burner front ceramic support. (See figure 15 below)
Fig. 15
SECTION 3
20