Fitting The Batteries (Remote Control Models) - Flavel Caress traditional Installation, Maintenance & User Instructions

3.4 FITTING THE BATTERIES - REMOTE CONTROL MODELS
3.4.1 The control valve is located at the base of the fire as shown below in
figure 20.
Fig. 20
3.4.2 Remove the battery compartment cover from the control valve as
indicated below in figure 21 and fit the 3 off AA sized batteries to the
control valve unit.
3.4.3 Ensure that the power isolation switch is in position "1" and the power
indicator light is illuminated (red) after the batteries have been fitted as
shown in figure 21 below.
Fig. 21
Indicator light
Decrease
flame
IMPORTANT NOTE : THE BATTERIES SHOULD BE REPLACED WITH GOOD
QUALITY ALKALINE BATTERIES WHEN REQUIRED, THE BATTERY LIFE IS EXPECTED TO
BE A MINIMUM OF 12 MONTHS WITH NORMAL USAGE. FOR BEST PERFORMANCE BFM
EUROPE RECOMMEND THE USE OF ENERGIZER BATTERIES WITH ITʼS PRODUCTS.
Position of battery
cover on control
valve
Power isolation switch
Power button
25
Battery compartment
cover opening lever
Increase flame
Battery
compartment
cover