Manually Operation Of Remote Models - Flavel Caress traditional Installation, Maintenance & User Instructions

5.5 MANUAL OPERATION OF REMOTE CONTROL & ELECTRONIC
FIRE CONTROL MODELS
5.5.1 These products can be operated manually should the need arise. The
control valve is located at the base of the fire as shown below in figure
2.
Fig. 2
5.5.2 Ensure that the power isolation switch is in position "1" and the power
indicator light is illuminated (red) as shown in figure 3 below.
Fig. 3
Indicator light
Decrease
flame
Position of control
valve
Power isolation switch
Battery compartment
cover opening lever
Increase flame
Power button
46
Battery
compartment
cover