Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Connect M007 to M083. (Either direction of the connector can be connected.)
2.Screw the M083 with the one screw(Ⓐ).
3.Latch the hook of M007 to the hook.
4.Connect M007 to M081.
M007: LEAD-CONNECTOR 4P
M083: ASSY-PCB-SENSOR
No.
Screw
Tighten torque(N・ｍ）
Ⓐ
M3X6
0.7 +0.2/-0.1
Ⓐ
Latch the Lead-Connector
to the hook.
9
Pass the Lead-Connector
to area A of Fig. A.
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
Hook latch position.
Assembling Angle of M083
M081: ASSY-PCB-ANALOG
Fig. A
Remove the adsorption sheet
of P604.
Your company internal use only.
Advertisement
