Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Screw M078 with the two screws(Ⓒ), and connect M005.
Through the circuit hole
to the hook.
No.
Screw
Tighten torque(N・ｍ）
Ⓒ
2.6X4
0.4 +0.2/-0.1
Ⓛ
M3X4
0.3 +0.15/-0.05
M022: HOLDER-HDD
M078: ASSY-PCB-HDD
Pin 1 on the other side
(black marking)
Tongue
M050: PLATE-HDD
Ⓒ x 2
Ⓛ x 2
Continuity side
Himeron
M005: FLAT-CABLE 50P
Tongue position
after inserted
17
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
M074: ASSY-ROM(HDD)
Assemble
M028: SHEET-HDD
Assemble while inserting tongue into the
slit of the plate.
M020: HOLDER-HDD
Set the salients to the
positioning holes and assemble.
Positioning hole
Arrow must be the side of
connector. (other side too)
Ⓛ x 2
M050: PLATE-HDD
Your company internal use only.
Advertisement
