Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Remove the tape from Lead-Connector 1 and Lead-Connector 2.
2.See three posts as a guide, put M027 on M069.
3.Screw M080 with the three screws(Ⓒ).
4.Connect Lead-Connector 1 and Lead-Connector 2 to M080.
5.Hold two Lead-Connectors with the stylepin.
6.Screw M013 with the three screws(Ⓐ) and the one screw(Ⓚ).
M027: SHEET-BTM
No.
Screw
Tighten torque(N・ｍ）
Ⓐ
M3X6
0.7 +0.2/-0.1
Ⓒ
2.6X4
0.4 +0.2/-0.1
Ⓚ
M3X10
0.7 +0.2/-0.1
Ⓒ x 3
M080: ASSY-PCB-GPS
Post
Stylepin
M013: PLATE
Set the dowel.
Lead-Connector 2
Lead-Connector 1
M069: ASSY-SLIDE
14
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
Ⓐ x 3
Ⓚ
Set the dowel.
Remove the connector cover.
Your company internal use only.
Advertisement
