Mitsubishi NR-261UM-07LAN5 Service Manual page 10

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Screw M081 with the five screws(Ⓐ).
2.Screw the S5-HOLDER with the four screws(Ⓐ) from a→b→c→d.
3.Latch the square hole of M021 to the hook, and set the dowel to the hole. (Fig. B)
4.Screw M021 with the one screw(Ⓐ).
No. Screw Tighten torque(N・ｍ）
Ⓐ
M3X6 0.7 +0.2/-0.1
a
S5-HOLDER
M081: ASSY-PCB-ANALOG
Hook
Dowel
There must be no space after
tightening of the screw.
Fig. B
10
b
d
Ⓐ x 9
c
M021: BRACKET-NAVI
Ⓐ
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
Your company internal use only.