Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Connect M006 and pull it forward.
2.Remove the separator and stick M032 to M011(revers side).
3.Remove the separator and stick M031 to M011(face side).
4.Set M011 to guide salient, and assemble.
M006: FLAT-CABLE 50P
Pin 1 (white marking)
Lock after FFC connected.
Continuity side
(reverse side)
M032: SHEET-COIL
M011: CHASSIS-ANALOG
Pull forward
12
Copyright (C) Mitsubishi Electric Corporation.
M031: SHEET-ANALOG
S5-CHASSIS
Your company internal use only.
NR-261UM-07LAN5
Advertisement
