Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Insert the S7-HDD to the S2-CHASSIS, and screw the two screws.
2.Set M051.
3.Pull out the slide part of the S2-CHASSIS, and screw M086 with
the four screws (Ⓑ), and M024.
4.Insert the FPC of M086 to the S2-CHASSIS.
5.Set back the slide after M068 set.
No.
Screw/Name
Tighten torque(N・ｍ）
M024
PIN-MONI
0.4 +0.15/-0.05
Ⓑ
M3X6
0.7 +0.2/-0.1
Ⓑ x 4
M024: PIN-MONI
Slide
M086: S2-MONI
Lock after FPC inserted.
Continuity side
M084: NAME-CARD(NR-261UM-07LAN5)
Top
M051: PANEL-HDD
2
Do not break hexagon socket.
M024: PIN-MONI
Latch the hook at right and left,
then push the top. (After
assembling, check if M068
and the panel is seamless.)
S7-HDD
Fold and set.
S2-CHASSIS
Two screws
Set this hook at first.
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
M068: ASSY-COVER-F
Your company internal use only.
Advertisement
