Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Connect FFC from S5-CHASSSIS to S5-DECK.
2.Fit the salients and put S5-DECK to S5-CHASSIS.
3.Set FPC-1 at the hooks of S5-DECK.
4.Insert the FFC to the cover of the S5-DECK. (View J)
5.Set M012, and screw the five screws(Ⓐ) and two screws(Ⓒ).
6.Connect FPC-2 from S5-DECK to S5-CHASSIS.
No.
Screw
Tighten torque(N・ｍ）
Ⓐ
M3X6
0.7 +0.2/-0.1
Ⓒ
2.6X4
0.4 +0.2/-0.1
Insert
View J
Lock after FFC connected.
S5-DECK
Continuity side
FFC
Fit the square holes
to the salients.
S5-CHASSIS
FFC
Set FPC-1 at these hooks.
Ⓐ x 3
View J
FPC-2
FFC
Lock after FPC connected.
7
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
Fit the dowels.
Insert M012 from downside surely.
M012: CHASSIS-L
FPC-1
Fit the dowels.
Your company internal use only.
Ⓒ x 2
Ⓐ x 2
Latch the hooks to the
square holes.
Advertisement
