Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Set M033 to M069.
2.Set M079 to M069, from front connector side with a slope.
3.Pass the salients to the circuit square holes, and insert the central connector.
4.Screw M079 with eight screws(Ⓐ) and the two screws(Ⓚ).
No.
Screw
Tighten torque(N・ｍ）
Ⓐ
M3X6
0.7 +0.2/-0.1
Ⓚ
M3X10
0.7 +0.2/-0.1
M033: SHEET-AUDIO
M079: ASSY-PCB-AUDIO
Insert the front connector
side to the square hole.
Pass the salients to the circuit
square holes. (three places)
M069: ASSY-SLIDE
13
Copyright (C) Mitsubishi Electric Corporation.
Ⓐ x 8
Ⓚ x 2
Your company internal use only.
NR-261UM-07LAN5
Connector mating
(Push "PUSH" on the circuit)
Advertisement
