Mitsubishi NR-261UM-07LAN5 Service Manual page 6

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Screw M082 with the two screws(Ⓐ).
2.Screw the COVER-DV3 with the one screw(Ⓐ).
3.Connect the FPC to M082.
Pass salient to the square hole
on the circuit board.
FPC
No. Screw Tighten torque(N・ｍ）
Ⓐ
M3X6 0.7 +0.2/-0.1
Ⓐ x 2
M082: ASSY-PCB-CONN
Ⓐ
Fit reentrant on the circuit board
to salient.
6
Copyright (C) Mitsubishi Electric Corporation.
Set FPC to COVER-DV3.
Lock after FPC connected.
Your company internal use only.
NR-261UM-07LAN5