Mitsubishi NR-261UM-07LAN5 Service Manual page 5

DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Screw M010 to M025 with two screws(Ⓚ).
2.Connect LEAD-CONNECTOR of the S4-HEAT SINK to the S4-CHASSIS.
3.Screw the S4-HEAT-SINK with four screws(Ⓐ).
No. Screw Tighten torque(N・ｍ）
Ⓐ
M3X6 0.7 +0.2/-0.1
Ⓚ
M3X10 0.7 +0.2/-0.1
Ⓚ x 2
M010: MOTOR-FAN
LEAD-CONNECTOR
M025: HEAT-SINK
Ⓐ x 4
S4-HEAT-SINK
5
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
S4-CHASSIS
Your company internal use only.