Advertisement
DISASSEMBLING PROCEDURES
● Disassembling procedures
In reverse of assembling procedures.
● Assembling procedures
1.Set M015 and screw the five screws(Ⓒ).
2.Remve the separator and stick M035 to M015.
3.Set M077 to S5-CHASSIS while matching the two salients.
4.Connect FFC from HDD circuit on S5-CHASSIS to M077.(View F)
5.Stick M029 to Navicore of M077.
6.Set M067, and screw the one screw(Ⓓ) and the four screws(Ⓔ).
Fold
Ⓒ x 5
M035: SHEET-DI
M015: CASE-DIGITAL
Fit the dowel to the hole.
Fit the salient of post to
the hole.
Remove the connector covers.
Ⓓ
M067: ASSY-SHIELD
Be careful to not change
the shape when
assembling.
M077: ASSY-PCB-DIGITAL
8
Copyright (C) Mitsubishi Electric Corporation.
NR-261UM-07LAN5
Ⓔ x 4
M029: SHEET-HS
Put on the Navicore.
Lock after FFC
connected.
FFC from HDD.
View F
Engage the connectors.
(Push "PUSH" on circuit board)
S5-CHASSIS
No.
Screw
Tighten torque(N・ｍ）
Ⓒ
2.6X4
0.4 +0.2/-0.1
Ⓓ
M2.6X3
0.4 +0.2/-0.1
Ⓔ
M2.6X6
0.4 +0.2/-0.1
Your company internal use only.
Advertisement
