Table of Contents
Advertisement
Overview
HV-F202GV is high precision 3CCD progressive scan color camera, which has single chip digital processing LSI, a C mount
prism, 1/1.8 inch 2,000,000 pixels square CCD and Gigabit Ethernet interface.
Since these cameras are Power over Ethernet (PoE) type, power supply is input via LAN cable.
Standard composition
Check when unpacking
Camera ··········································································································· 1
Installation guide ························································································· 1
Plug for DC IN/SYNC connector (HR10A-10P-12S) ················· 1
Optional accessories
(1) 12 pin plug
(2) Junction box
(3) Tripod adaptor
(4) LAN cable (CAT5E or CAT6)
In the CE Marking region, use a high flexibility shielded cable
(recommended C5E(S-HFR)(K)-HSL-1: Oki). Refer to page 5.
Features
・High resolution and color fidelity
The 1/1.8-inch 2.02 million pixels square lattices progressive scan CCD and dichroic prism for RGB color achieves a high
resolution of UXGA picture and good color reproduction.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 55(W) x 55(H) x
89(D) mm / approx. 350g.
・Gigabit Ethernet
By adoption of Gigabit Ethernet interface, high-speed connection of maximum of 1 Gbps can be possible. Moreover, by using
hub or switcher, construction of multiple camera system can be easily performed. It is also possible to 100m.
TM
・GigE Vision
correspondence
Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed data transmit is available and
suitable for image processing.
TM
・GENiCAM
correspondence
Development of camera control system is easy because industrial camera control API "GENiCAM" lead EMVA (European
Machine Vision Association).
・Various picture quality enhancement
Independent size color masking is the Hitachi innovation for optimizing color balance. Saturation and hue of 6 colors (Red,
Green, Blue, Cyan, Magenta and Yellow) can be adjusted independently to deliver the best color in image capture, microscope
and other applications.
In-out gradation control can be arbitrarily adjusted by using LUT.
・Auto shading correction
Color shading due to aberration of the lens is automatically compensated or reduced.
・Versatile CCD drive functions
Video frame capture on demand using external trigger signal
Long integration mode (max. 10 seconds)
Variable shutter mode (min. 1/100,000 second)
Auto electronic shutter mode
・Power over type Ethernet
Power supply can be input via Ethernet cable.
GigE Vision
TM
GENiCAM
is a trademark of EMVA (European Machine Vision Association). Ethernet is a trademark of XEROX Corporation.
HR10A-10P-12S(01)
JU-F30/JC-100
TA-F202
TM
and the distinctive logo are trademarks of AIA (Automated Imaging Association).
(5) Camera cable
Molded type
2m
C-201KSM
5m
C-501KSM
10m
C-102KSM
In the CE Marking region, use the shield type and attach clamp filter
(ZCAT 2035-0930A: TDK) at both ends (camera and video processor
ends). Refer to page 5.
Note : When not using the specified junction box, LAN cable, camera
cable and clamp filter, malfunctions may be caused.
Shield type
C-201KSS
C-501KSS
C-102KSS
1
Advertisement
Table of Contents
