Table of Contents
Advertisement
Overview
KP-F500PCL/SCL are CameraLink output type black and white camera which utilized the 2/3 –inch progressive scan CCD
image sensor with square pixel. KP-FR500PCL/SCL are RAW data output type.
It provide images of unparalleled quality at 16 frame per second non-interlaced output.
Since KP-F500PCL/FR500PCL are Power over CL type, PC can provide power to camera passed CameraLink cable.
Standard composition
Check when unpacking
Camera (with IR cut filter） ·································································· 1
CD ROM (Documents and Control software) ······························ 1
Composition table / Software License ··········································· 1
Optional accessories
(1) 12 pin plug
(2) Junction box
(3) Dummy glass (AR coated) ARC1214
(4) Tripod adaptor
(5) Mini-CameraLink cable
Features
・High resolution
The 2/3-inch 5,000,000 pixels square lattices CCD achieve a high resolution.
・Small and lightweight
The small SDR connector for digital output allows the camera size and mass to be drastically reduced to 44(W) x 44(H) x
41(D) mm / approx. 110g.
・Power over type CameraLink
KP-F500PCL/FR500PCL can be supplied by CameraLink cable.
System example
KP-F500PCL/SCL and KP-FR500PCL/SCL connect to frame grabber board using CameraLink cable.
HITACHI
KP-F500PCL
KP-FR500PCL
HITACHI
KP-F500SCL
KP-FR500SCL
HR10A-10P-12S(01)
JU-F30/JC-100
TA-F500
Power over type
Mini-CameraLink cable
(x1 when Base configuration)
Mini-CameraLink cable
(x 2 when Medium configuration)
AC adaptor
(6) Camera cable
Molded type
2m
C-201KSM
5m
C-501KSM
10m
C-102KSM
In the CE Marking region, use the shied type and install
clamp filter (ZCAT 2035-0930A: TDK) at both ends (camera
and video processor ends).
Power over type CameraLink
frame grabber board
CameraLink
frame grabber board
Shield type
C-201KSS
C-501KSS
C-102KSS
1
Advertisement
Table of Contents
