Hitachi Kokusai Electric HV-F202GV Installation Manual page 24

・UPPER LIMIT1 ： Upper limit 1 of automatic adjustment range
Command name
Address
Values (Factory setting 12.0)： 0.00 to 12.00
・LOWER LIMIT2 ： Lower limit 2 of automatic adjustment range
Command name
Address
Values (Factory setting 0) ： 0 to 341 :
・UPPER LIMIT2 ： Upper limit 2 of automatic adjustment range
Command name
Address
Values (Factory setting 341) ： 0 to 341
Note : Since LIMIT1 and LIMIT2 are link together,
if one is changed then the other is changed to corresponding value.
(5) MANUAL WHITE BALANCE ： Setting of manual white balance
・SELECTOR ： Switch the adjustment color (RED / BLUE)
Command name
Address
Values (Factory setting 1) ： 1 "Red"
・LEVEL1 (related to SELECTOR) ： Adjust the RED / BLUE gain
Command name
Address
Values (Factory setting 1)： 0.5 to 2.0
・LEVEL2 (related to SELECTOR) ： Adjust the RED / BLUE gain
Command name
Address
Values (Factory setting 128)： 0 to 255
Note : Since LEVEL1 and LEVEL2 are link together,
if one is changed then the other is changed to corresponding value.
(6) AUTO WHITE BALANCE ： Setting of auto white balance
Command name
Address
Values (Factory setting 0) ： 0 "Off"
： GainAutoUpperLimit (Float / Standard)
： A0F7002C h
Adjust the gain level 0 to 12.00dB in 342 steps at intervals of 0.035191dB.
： GainAutoLowerLimitRaw (Integer / Standard)
： A0F70020 h
Adjust the gain level 0 to 12.00dB in 342 steps at intervals of 0.03519dB.
： GainAutoUpperLimitRaw (Integer / Standard)
： A0F70024 h
Adjust the gain level 0 to 12.00dB in 342 steps at intervals of 0.03519dB.
： BalanceRatioSelector (Enumeration / Standard)
： A0070024 h
Switch the color adjusted at LEVEL Red.
3 "Blue" Switch the color adjusted at LEVEL Blue.
： BalanceRatio (Float / Standard)
： A0070028 h
Adjust the RED / BLUE gain range from x0.5 to x2.0 .
： BalanceRatioRaw (Integer / Standard)
： A0F7000C h
Adjust the RED / BLUE gain in 256 steps.
： BalanceWhiteAuto (Enumeration / Standard)
： A0070020 h
Automatic white adjustment is not performed
and can adjust MANUAL WHITE BALANCE.
1 "Once" Automatic white adjustment is performed
that affects features on the MANUAL WHITE BALANCE.
And after adjustment this feature automatically will turn to "Off".
2 "Continuous" White balance is adjusted in real time (automatic tracking).
*This command is given to priority more than MANUAL WHITE BALANCE.
11