Download Print this page

Haier UDW603 Instruction And Installation Manual page 14

60cm fully integrated dishwasher
Hide thumbs

Advertisement

Installing the plinth
Position the dishwasher in the cut out in the kitchen cabinet.
Install the continuous plinth according to the manufacturer's instructions.
Slowly open the dishwasher door to see if it interferes with the plinth.
If so, rest the bottom edge of the décor door panel against the plinth and mark the
area to be cut. Leave at least 3mm of play between the panel and the plinth to allow
the door to rotate freely.
Remove the plinth and trim as needed.
Protect the bare edge with a suitable varnish to prevent water ingress (see Fig 14).
Re-install the plinth.

Advertisement

loading

  Related Manuals for Haier UDW603