CipherLab 9700 Reference Manual page 240

9700 Mobile Computer (CE)
Verify Check Digit
Transmit Check Digit
COMPOSITE
Composite CC-A/B
Enable Composite
CC-A/B
Composite CC-C
Enable Composite CC-C Checkbox to enable Composite CC-C decoding.
Composite TLC 39
Enable TLC 39
General Preference
UPC Composite Mode
GS1-128 Emulation
Mode
GS1 DATABAR
GS1 DataBar-14
Enable GS1 DataBar-14 Checkbox to enable GS1 DataBar-14 decoding.
GS1 DataBar Limited
Enable GS1
DataBar-Limited
GS1 DataBar Expanded
Enable GS1
DataBar-Expanded
Convert to UPC/EAN
230
Select whether to verify the check digit, which is the last
character of the barcode. If the check digit is incorrect, the
barcode will not be accepted.
Decide whether to include the check digit in the data being
transmitted.
Checkbox to enable Composite CC-A/B decoding.
Checkbox to enable TLC 39 decoding.
UPC barcodes can be "linked" with a 2D barcode during
transmission as if they were one barcode.
UPC Never Linked
Transmit UPC barcodes regardless of whether a 2D
barcode is detected.
UPC Always Linked
Transmit UPC barcodes and the 2D portion. If the 2D
portion is not detected, the UPC barcode will not be
transmitted.
CC-A/B or CC-C must be enabled.
Auto-discriminate
Transmit UPC barcodes as well as the 2D portion if
present.
Sets GS1-128 emulation mode for UCC/EAN Composite
Codes.
Checkbox to enable GS1 DataBar-Limited decoding.
Checkbox to enable GS1 DataBar-Expanded decoding.
Reference Manual
Disable
Disable
Disable
Enable
Disable
UPC Always
Linked
Disable
Enable
Enable
Enable