CipherLab 9700 Reference Manual page 205

TIME SYNC
SNTP tabbed page: Synchronizes the mobile computer's time with an NTP server
either automatically or manually. Users can also select the time period for
auto-sychronization. Synchronized time will be written to RTC and system time will
be updated.
Check Internet connection status if the following synchronization status shows:
"Cannot get time information through SNTP".
Note: For auto-synchronization to function properly, Time Synchronization
application should be shut down. Close the application when you are finished
adjusting the settings.
USB CONNECTION
Sets the type of USB connection without re-plugging the USB cable.
ActiveSync Serial Mode: Sets up ActiveSync connection with PC through serial
protocol. This is the default setting.
Mass Storage – SD Card: Presents the mobile computer with an SD card installed
as a storage device. If no SD card is installed, the directory on the PC will be blank.
Note: Selection of ActiveSync Advanced Network Mode or ActiveSync Serial Mode will
be synchronized with settings under Start | Settings | Control Panel | USB to
PC.
Chapter 6 Manage Mobile Computer
195