CipherLab 9700 Reference Manual page 119

Auth Server
TTLS Inner Method
PMK Caching
TX Diversity
RX Diversity
Frag Thresh
RTS Thresh
LED
Tray Icon
Type of authentication server being used for EAP authentication.
Value:
Type 1
Type 2
Default: Type 1
Authentication method used within secure tunnel created by EAP-TTLS.
Value:
Auto-EAP
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
Default: Auto-EAP
The type of Pairwise Master Key (PMK) caching to use with a WPA2
encryption type (alternative to WPA2 CCKM).
Value: Standard or OPMK (opportunistic PMK)
Default: Standard
How to handle antenna diversity when transmitting data to AP.
Value:
Main Only
Aux Only
On
Default: On
How to handle antenna diversity when receiving data from AP.
Default: On-start on Main
This is a fixed setting; on startup, the main antenna is always used
When packet size exceeds the set threshold, it becomes fragmented.
Value: 256 ~ 2346
Default: 2346 (bytes)
When packet size exceeds the set threshold, RTS/CTS is required on link.
Value: 0 ~ 2347
Default: 2347 (bytes)
Indicates whether or not an LED is used.
Value: On, Off
Default: Off
Whether to enable the system tray icon or not.
Value: On, Off
Default: On
Cisco Secure ACS or another server that uses
PEAPv1 for PEAP
(PEAP-MSCHAP)
A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
Any available EAP method
Use main antenna only
Use auxiliary antenna only
Use diversity
Chapter 4 Radios
with EAP-MSCHAPV2
109