CipherLab 9700 Reference Manual page 239

Concatenation
Redundancy
CODE 2 OF 5
Chinese 25
Enable Chinese 25
Discrete 25
Discrete 25
Length option
Interleaved 25
Interleaved 25
Length option
Verify Check Digit
Transmit Check Digit
Convert To EAN-13
Matrix 25
Matrix 25
Length option
Redundancy
Sets whether to enable decoding ISBT-128 by performing
concatenation of ISBT data
Disable: Does not perform concatenation
Enable: Performs
barcodes.
Auto-discriminate:
ISBT-128 barcodes which require concatenation and
those which do not need concatenation.
Sets redundancy between 2-20.
Checkbox to enable Chinese 25 decoding.
Checkbox to enable Discrete 25 decoding.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Checkbox to enable Interleaved 2 of 5 decoding.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit is incorrect,
the barcode will not be accepted.
Disable
USS Check Digit
OPCC Check Digit
Decide whether to include the check digit in the data being
transmitted.
Convert a 14-character Interleaved 25 barcode into EAN-13
if the following requirements are met:
The barcode must have a leading 0 and a valid EAN-13 check
digit.
Checkbox to enable Matrix 2 of 5 decoding.
Sets the length of the Code 39 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Sets read redundancy
Appendix IV
concatenation on
Auto-discriminates
2D Imager (SE4500DL)
Disable
all ISBT-128
between the
10
Enable
Enable
Max / Min
Length
(4-55)
Enable
Max / Min
Length
(4-55)
Disable
Disable
Disable
Enable
Max / Min
Length
(4-55)
Disable
229