Power Saving Mode; Basic Settings - Beurer AS 50 Instruction Manual

6.3 Power saving mode

In time display press the
3 sec. to switch on the power saving mode. The
display of the activity sensor is switched off in this
mode to increase the battery life. Only the time of
day function is still working. Steps counting stops
after 10 seconds of non-moving time after switching
to the power saving mode.
NOTE: Step counting and activity functions are
switched off in the same manner as the display of the
activity sensor. Press any button for approx. 3 sec. to
reactivate the display.
7. B
ASIC SETTINGS
Overview – Setting menu
Adjust values with
Short press = single entry, press and hold = accelerates the entry.
.
17
button for approx.