Step Counting On The Activity Sensor; Change Basic Settings - Beurer AS 50 Instruction Manual

8.4 Step counting on the activity sensor

As soon as you have run at least 10 steps in one go, the number of
steps and the activity time are updated on the display. These initial
steps are taken into account for step counting.

8.5 Change basic settings

Set sensitivity and change basic functions
To achieve an accurate result, the sensitivity of the device should be
individually set for the user. Five sensitivity levels can be selected
here (1=Low sensitivity, 5=High sensitivity). The slower your running
speed, the higher sensitivity level you should select.
NOTE: Recommended levels of the sensitivity you will find in the
description of the different wearing methods (see chapter "6 Getting
started").
You are in the activity menu. Your activity sensor
shows
Display 1
(If not, toggle between the main displays with the
help of the
Set/change sensitivity
Press
is displayed.
SENSI
Set the sensitivity of the device at first to
Level 1. You can test the sensitivity at a later date
in the menu flow and adapt it if necessary (see
below "Test sensitivity").
Confirm with
.
button).
button for approx. 3 seconds.
button.
27