Fcc Statement; Technical Specifications - Beurer AS 50 Instruction Manual

12. FCC S
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation.
The equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
13. T
ECHNICAL SPECIFICATIONS
Power Supply
Activity sensor
Measurement Range
Setting Range
Operating and storage
temperature / Humidity
External dimensions
Weight
Subject to technical modifications.
TATEMENT
3V lithium battery, type CR2032
Spray proof
Steps:
Activity time:
Calories:
Fat burned:
Walk/run step: 0ft 8in to 8ft 2in (20 to 250 cm)
14°F to 122 °F (-10°C to 50°C),
< 90% relative humidity
1.6" x 1.6" x 0.6"
(41 mm x 41 mm x 15,5 mm)
0.95 oz (27 g) incl. clip and battery
0 – 99,999
0 – 24h
0 – 99,999
0 – 9,999
37