ENGLISH Table of contents 1. Getting to know your device ..4 7.8 Heart rate ......17 2. Signs and symbols ......7 7.9 Sleep mode ......20 3. Notes ..........8 7.10 Switching Bluetooth ® 4. Initial use ........10 on/off ........
Page 3
Read these instructions for use carefully and keep them for later use. Make them accessible to other users and note the information they contain. Included in delivery Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are present.
The activity sensor also has a sensor for measuring your heart rate. This allows you to measure your heart rate in real time on your wrist. With the free “beurer HealthManager” app, you can easily transfer your motion activity from the...
Page 5
As a result, you see key information at a glance and keep up to date with all your notifications. The activity sensor in combination with the “beurer HealthManager” app offers the following functions: • Display of time and date •...
Page 6
System requirements For the “beurer HealthManager” app - iOS ≥ 10.0 / Android ≥ 5.0 - Bluetooth ≥ 4.0 ® Data transfer via Bluetooth wireless technology ® The activity sensor uses Bluetooth low energy technology, frequency band ® 2.4000–2.4835 GHz, the maximum transmission power emitted in the frequency band <20 dBm, compatible with Bluetooth...
2. Signs and symbols The following symbols appear in these instructions for use and on the device: WARNING Warning notice indicating a risk of in- Manufacturer jury or damage to health. This product satisfies the require- Read the in- ments of the applicable European and structions for national directives.
3. Notes WARNING Avoid contact with sun cream and similar substances as these could damage the plastic parts. • Keep packaging material away from children. Choking hazard! • The activity sensor is protected against the effects of temporary immersion in water.
Page 9
Notes on handling batteries • If your skin or eyes come into contact with fluid from a battery cell, flush out the affected areas with water and seek medical assistance. • Protect batteries from excessive heat. • Risk of explosion! Never throw batteries into a fire. •...
4. Start the “beurer HealthManager” app and follow the instructions. In the settings menu of the app, select and connect the AS 98. A randomly generated six-digit PIN code is displayed on the activity sensor, and at the same time an input field appears on the smartphone in which you must enter this six-digit PIN code.
Beurer V1.1 Tips for successfully pairing the activity sensor with your smartphone • Position the smartphone as close as possible to your activity sensor. • Maintain a distance of 30 m from other Bluetooth sensors/devices. ® 10628 88.8 88.8 5. Charging the battery...
WARNING Do NOT charge the activity sensor if the two charger contacts on the rear of the device are wet. If necessary, carefully dab the two charger contacts dry with a cloth. If a battery leaks, put on protective gloves and dispose of the device. 6.
7. Functions 7.1 Overview of functions The activity sensor has the following functions: time with date and battery state, pedometer, calorie consumption, distance covered, active time, daily target, heart rate measurement and sleep mode. The functions are reset to zero every day at midnight. The counting then starts again from the beginning.
7.2 Time/date/battery indicator The activity sensor displays the current time and the current date. Once the activity sensor has been synchronised with the smartphone, the time and date on the smartphone are transferred to the activity sensor. The current battery state is also displayed at the top right.
7.4 Calorie consumption The activity sensor calculates your calorie consumption using the details you have entered in the app (height, age, gender, weight) and the steps you have taken. When you wake up in the morning, the activity sensor will already show a figure for the number of calories burned, as your body also burns calories whilst resting (BMR).
7.7 Daily target You can set a daily target in the settings of the “beurer HealthManager” app (e.g. 10,000 steps). You can see the current progress towards the set daily target (in %) on the display of the activity sensor.
Page 18
2. If you press and hold the “Touch” button for 3 seconds, “detecting …” appears in the display and the activity sensor starts to record the heart rate. As soon as the activity sensor has recorded a heart rate, the meas- ured value appears on the display.
Page 19
“Fat Burning” appears on the display if your current heart rate is between 50% and 60% of your maximum heart rate. “Aerobic” appears on the display if your current heart rate is between 60% and 70% of your maximum heart rate. “Steady”...
7.9 Sleep mode To measure your movements when you are asleep, switch the device to sleep mode before you go to sleep. To do so, press the “Touch” button re- peatedly until the following screen is shown in the display. Press and hold the “Touch”...
(e.g. text message or WhatsApp) via push on your smartphone. The prerequisites for this are that the activity sensor is connected to your smartphone via Bluetooth ® and the “beurer HealthManager” app is installed. When a message is received, a notification first appears on the display.
Page 22
Calls: In the settings of the “beurer HealthManager” app you can choose to be notified of calls on the activity sensor. The prerequisites for this are that the activity sensor is connected to your smartphone via Bluetooth and the “beurer HealthManager”...
8. Transferring data to your smartphone To transfer the recorded data from your activity sensor to the “beurer HealthManager” app, proceed as follows: 1. Activate Bluetooth on your smartphone. ® 2. Open the “beurer HealthManager” app. 3. Connect your activity sensor to the app. Your data is now automatically trans- ferred to the smartphone.
10. Cleaning Regularly clean your activity sensor with a damp cloth. Remove skin residue and dirt from the strap and especially from the contact surfaces on the inside of the strap so that the material is not damaged. 11. Frequently asked questions What is the correct way to wear the activity sensor? Wear the activity sensor on your left wrist if you are right-handed, or on your right wrist if you are left-handed.
Page 25
® How do I synchronise my data with the app? To transfer the recorded data from your activity sensor to the “beurer HealthManager” app, follow the instructions in section “8. Transferring data to your smartphone”. The data transfer to the smartphone does not work.
Page 26
• Check that you are using the correct app. A data transfer is only possible with the “beurer HealthManager” app. The activity sensor is connected to another smartphone. You can tell whether the AS 98 is connected to a smartphone, as you will see a blue Bluetooth symbol on ®...
Page 27
If you are using an Android™ smartphone and the Bluetooth connection cannot ® be established, disconnect Bluetooth in the “beurer HealthManager” app and ® then re-connect the AS 98. When should I charge the battery in the activity sensor? Charge the battery of the activity sensor if the following image is shown on the display when pressing the button.
Page 28
To do this, follow the instructions in the section “Sleep mode”. How can I activate the alarm function? Enter the required alarm time into the “beurer HealthManager” app. Synchronise the activity sensor with the app after entering/changing the alarm time.
Where can I reorder the USB charging cable/wrist band? See section “Replacement parts and wearing parts”. What is included in the delivery? An activity sensor and a USB charging cable are included in the delivery. 12. Disposal Batteries must not be disposed of in the household waste. They may contain poi- sonous heavy metals and are subject to special refuse treatment.
The word mark Bluetooth and the associated logo are registered trademarks of ® Bluetooth SIG, Inc. Any and all use of these brands by Beurer GmbH is done so under licence. Other trademarks and trade names are the property of the relevant holder.
14. Guarantee Beurer GmbH, Söflinger Straße 218, 89077 Ulm, Germany (hereinafter referred to as “Beurer”) provides a warranty for this product, subject to the requirements below and to the extent described as follows. The warranty conditions below shall not affect the seller’s statutory warran- ty obligations which ensue from the sales agreement with the buyer.
Page 32
A warranty claim shall only be considered if the buyer can provide Beurer, or an authorised Beurer partner, with – a copy of the invoice/purchase receipt, and – ...
Page 33
Beurer; – damage that arises during transport between manufacturer and customer, or between service centre and customer;...
Page 36
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,Inc and any use of such marks by Beurer GmbH is under license other trademarks and tradenames are those of their respective owners. Apple and the Apple logo are trademarks of Apple Inc, registered in the US and other countries.