Sleep Mode; Switching Bluetooth ® On/Off - Beurer AS 95 Pulse Instructions For Use Manual

7.9 Sleep mode

To measure your movements when you are asleep, switch the device to sleep mode
before you go to sleep. To do so, press the button repeatedly until is
shown in the display. Press and hold the button for 3 seconds. appears
on the display and the device switches to sleep mode.
If you briefly press the button in sleep mode, you can switch between the
and views. If the device is in sleep mode, no heart rate
measurements can be carried out.
When you wake up in the morning, press the button for approx. 3 seconds to switch
off sleep mode on the activity sensor.
7.10 Switching Bluetooth on/off
®
Bluetooth is switched on as standard on the device. This can be seen from
®
the Bluetooth logo in the display and corresponding graphic displayed
®
/ .
To switch off Bluetooth on the device, press the button repeatedly until
®
is shown in the display. Press and hold the button for 3 seconds.
46