Screen Size Adjustment - Sanyo PLC-ZM5000 Owner's Manual

Hide thumbs Also See for PLC-ZM5000:

Owner's manual (152 pages)

Command list (1 page)

Manual (89 pages)

Table Of Contents

Table of Contents

Computer Input

Reset

To reset the adjusted data, select Reset and press the

SELECT button. A confirmation box appears and then

select yes. All adjustments will return to their previous

figures.

Store

To store the adjusted data, select Store and press the

Point ► or the SELECT button. Use the Point ▲▼ buttons

to select one from Image 1 to 10 and press the SELECT

button.

A confirmation box appears and then select yes. Stored

data can be called up by selecting an Image (1-10) in the

Image Mode Selection on page 40.

Select the desired screen size that conforms to the input

signal source.

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Screen

and then press the Point ► or the SELECT button.

Use the Point ▲▼ buttons select the desired item

and then press the SELECT button.

Normal

Provide the image within a screen size keeping its original

aspect ratio.

Full

Provide the image to fit full screen size.

Wide (16:9)

Provide the image at the 16:9 wide screen ratio.

Zoom

Scale the image proportionally to fit the entire screen.

Either side of image may go over the screen.

True

Provide the image in its original size. When the original

image size is larger than the screen size (1920 x 1200),

the projector goes to the panning mode automatically.

Use the Point ▲▼◄► buttons to pan the image. When

adjusted, the arrows will turn red. When reaching to the

correction limits, the arrows will disappear.

Custom

Provide the last stored aspect screen image.