Installation; Positioning The Projector; Lens Shift Adjustment - Sanyo PLC-ZM5000 Owner's Manual

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of
the screen. (for PLC-ZM5000)
Note:
• T he brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
4.5'(1.4 m)
Screen Size
(W x H) mm
16:10 aspect ratio
Zoom (max.)
Zoom (min.)
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function.
This function makes the positioning of images easy on the screen. (See page 27)
The display position can
be shifted upward up
to 60% elevation of the
display.
When the lens is shifted to top.
The display position
can be shifted to
the left in up to 10%
width of the display.
When the lens is shifted to leftmost. When the lens is shifted to rightmost.

Installation

Positioning the Projector

78.6
'
46.1 (14.0 m)
'
34.6 (10.5 m)
'
23.0 (7.0 m)
'
11.4 (3.5 m)
''
100
''
40
''
59
40'' 100''
862 x 538 2154 x 1346
4.5'(1.4 m)
11.4' (3.5 m)
7.7'(2.4 m)
19.5' (5.9 m)

Lens Shift Adjustment

The display position can be
shifted downward up to 60%
low level of the display.
When the lens is shifted to bottom.
'
(24.0 m)
''
300
200 ''
''
177
''
118
200'' 300''
4308 x 2692 6462 x 4039
34.6'(10.5 m)
23.0' (7.0 m)
39.2' (12.0 m)
58.9' (18.0 m)
The display position can
be shifted to the right in
up to 10% width of the
display.
(Inch Diagonal)
Max. Zoom 400''
''
400
Min. Zoom
''
236
(Center)
400''
8616 x 5385
46.1'(14.0 m)
78.6' (24.0 m)
Lens shift adjustable range
60%
Shift range
Lens shift center
position
10%
17