Indicators And Projector Condition - Sanyo PLC-ZM5000 Owner's Manual

Check the indicators for the projector condition.
The projector is operating normally .
Indicators
WARNING
POWER LAMP
TEMP.
green red
red
❖
❖
❖
❖
❖
❖
❖
❖

Fig .1 Filter replacement icon and
Please wait . . ..
• • • on
• • • on (red)
❖
• • • on (blue)
❊
• • • dim
• • • dim (red)
❖

Indicators and Projector Condition

WARNING
SHUTTER
FILTER
blue
orange



 ❊







❊

❊

• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • blinking at the normal
❊
rate (blue and dim red)
(approx. 1 second ON, 1
second OFF)
• • • off
• • • Differ according to conditions.

LAMP
Projector Condition
REPLACE
orange
The projector is off. (The AC power cord is
unplugged.)
The projector is in stand-by mode. Press

the ON/STAND-BY button to turn on the
projector.
The projector is operating normally.

(The shutter is open)
The projector is operating normally.

(The shutter is closed)
The projector is preparing for stand-by or
the projection lamp is being cooled down.

The projector cannot be turned on until
cooling is completed and the POWER
indicator lights green.
The projection lamp is being cooled down in

the Power management mode.
The projector is in the Power management

mode.
The projection lamp is being cooled down in

the Shutter management mode.
The projector is in the Shutter management

mode. Press the ON/STAND-BY button to
turn on the projector.
The filter is scrolled using the FILTER button

on the remote control or the Filter control
function in the setting menu. When the filter
is being scrolled, the Filter replacement icon
and Please wait . . . message (Fig. 1) appear
on the screen for about 30 seconds.
• • • blinking fast (approx. 0.5 seconds
ON, 0.5 seconds OFF)
• • • blinking fast (blue and dim red)
❊
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • blinking slow (approx. 2 seconds
ON, 2 seconds OFF)
Appendix
79