Moving The Projector; Cautions In Handling The Projector - Sanyo PLC-ZM5000 Owner's Manual

Safety Instructions
Remove the protector on the lens before use, and keep it for later use. For
transportation, press and hold the LENS button or LENS SHIFT button for
more than 5 seconds to make the lens return to the central position, and
then attach the protector to protect the lens. (Only for PLC-ZM5000)
Use the handle grip when moving the projector.
Retract the adjustable feet to prevent damage to the lens and cabinet
when carrying.
When this projector is not in use for an extended period, put it into a
suitable case to protect the projector.
CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service in an unsuitable transport
case. This may cause damage to the projector. For information about transporting the projector by
courier or any other transport service, consult your dealer.
– Do not put the projector in a case before it is cooled enough.
Do not hold the lens or the lens compartment tube when
lifting or moving the projector. Doing so may cause
damage to the lens and the projector.
Care must be taken when handling the projector; do not
drop, bump, subject it to strong forces, or put other things
on the cabinet.
CAUTION
Projection lens is a motorized lens. Please note the
followings when using the projector.
● Do not touch the lens while it is moving as this
could cause injury to the fingers.
● Never allow children to touch the lens.
8

Moving the Projector

Notes on protector

Cautions in Handling the Projector

Protector
Do not hold the lens and the peripheral part.