Image Adjustment - Sanyo PLC-ZM5000 Owner's Manual

1 Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Image
adjust and then press the Point ► or the SELECT
button.
Use the Point ▲▼ buttons to select the desired item
2
and then press the SELECT button to display the
adjustment dialog box. Use the Point ◄► buttons to
adjust the setting value.
Contrast
Press the Point ◄ button to decrease the contrast; press
the Point ► button to increase the contrast (from 0 to 63).
Brightness
Press the Point ◄ button to decrease the brightness;
press the Point ► button to increase the brightness (from
0 to 63).
Iris
This iris function effectively increase the contrast intensity.
Press the Point ◄► buttons to select Off or On.
Off ...... Disabled.
On ...... Contrast is prioritized over brightness.
Color temp .
Use the Point ◄► buttons to select the desired Color
temp. level (High, Mid, Low or XLow).
White balance (Red)
Press the Point ◄ button to lighten red tone; press the
Point ► button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point ◄ button to lighten green tone; press the
Point ► button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point ◄ button to lighten blue tone; press the
Point ► button to deepen blue tone (from 0 to 63).
Offset (Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone of
the black level of an image; press the Point ► button to
deepen red/green/blue tone of the black level of an image.
Sharpness
Press the Point ◄ button to decrease the sharpness
of the image; press the Point ► button to increase the
sharpness of the image (from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).

Image Adjustment

Computer Input
Image adjust Menu
Selected Image mode
Use the Point ◄►
buttons to adjust the
setting value.
Note:
When White balance Red, Green or
Blue is adjusted, Color temp. will
change to Adj..
41