Sanyo PLC-ZM5000 Owner's Manual page 65

Filter counter
This function is used to set a frequency for the filter
replacement.
Use the Point ▲▼ buttons to select Filter counter and
then press the Point ► or the SELECT button to access
the submenu items.
Filter counter...... Show the total accumulated time of
the filter use timer setting.
Timer............... To set a timer, when the projector
reaches the time, the Filter
replacement icon (Fig.1) appears on
the screen and the total accumulated
time turns red, indicating that the
filter replacement is necessary. If the
filter is out of scroll and the projector
reaches a time set in the timer
setting, Fig.2 appears on the screen,
indicating that the filter cartridge
replacement is necessary.
Filter counter reset...When replacing the Filter cartridge,
reset the Filter counter and the Scroll
remaining (p.68).
Scrolls remaining... When the filter scroll is counted down
to 1, Scroll remaining on the screen
is showing 0 scroll(s) , the last scroll
icon (Fig.3) appears on the screen.
When the filter scroll is counted down
to 0, the Filter cartridge replacement
icon (Fig.4) appears on the screen
and the WARNING FILTER indicator
lights orange, indicating that the filter
cartridge replacement is necessary.
Scroll counter Reset...When replacing the Filter cartridge,
reset the Filter counter and the Scroll
remaining (p.68).
Note:
• Do not reset the counter when the filter or the filter
cartridge is not replaced.
• Timer setting notifies that the filter needs replacement.
To replace the filter, use the filter control function
(p.58).
Test pattern
Various test pattern are available for use when setting
up the projector: Color, Gradation1-4, All white, All black
and Cross.
Factory default
This function returns all setting values except for User
logo, PIN code lock, Logo PIN code lock and Filter
counter to the factory default settings.
Filter counter
Press the SELECT button to select
Timer and then use the Point ▲▼
buttons to set the timer. Select from (Off/
400H/700H/1000H) depending on the
operating environment.
Note:
W hen the set time of Filter counter
is not reached, Timer cannot be
selected; while when the maximum
time value 1000H is surpassed,
1000H can be selected again.
Fig .1 Filter replacement icon
Filter replacement icon appears
on the screen at a set time.
Fig .2
Fig .3 Last scroll icon
Last scroll icon appears on
the screen when the filter is
down to the last scroll.
Fig .4 Filter cartridge replacement icon
Filter cartridge replacement
icon appears on the screen
when the filter scroll is
counted down to 0 scroll.
Note:
• Fig.1, Fig. 2, Fig. 3 and Fig. 4 appear
at turning on and selecting input
source.
• Fig.1, Fig. 2, Fig. 3 and Fig. 4 will not
appear when the Display function is
set to Off (p.52) or during "Freeze"
(p.30).
Setting
65