Mounting The Thermostat Into The Base Plate - Proliphix IMT Series Installation Manual

Installing and Wiring the Thermostat

Mounting the Thermostat into the Base Plate

The Proliphix thermostat contains jumpers to configure the HVAC power settings.
The power settings determine which HVAC power source (RH or RC) is configured
to turn on each HVAC system (cool, heat, and fan). Most applications use only RH
power. The Proliphix thermostat is shipped from the factory with the RH and RC
jumpered together.
Table 8
Table 8 HVAC Power Configuration
HVAC Power Configuration
RH only (default) or RC only
RH and RC Supplies separate
RH and RC Supplies separate
Figure 7 Jumper Configuration
12
Beta Draft Confidential
lists the possible HVAC power configurations.
Proliphix Internet Managed Thermostat (IMT) Installation Guide, Release 1.0
Supplies...
W1, W2, Y1, Y2, G
RH supplies W1, W2, G; RC supplies Y1 and Y2
RH supplies W1 and W2; RC supplies Y1, Y2, G
Part No. 600-03100-000, Rev. 2