Beta Draft Confidential
Mounting the Thermostat into the Base Plate
The Proliphix thermostat contains jumpers to configure the HVAC power settings.
The power settings determine which HVAC power source (RH or RC) is configured
to turn on each HVAC system (cool, heat, and fan). Most applications use only RH
power. The Proliphix thermostat is shipped from the factory with the RH and RC
jumpered together.
Table 7
Table 7 HVAC Power Configuration
HVAC Power Configuration
RH only (default) or RC only
RH and RC Supplies separate
RH and RC Supplies separate
Figure 5 Jumper Configuration
Proliphix Internet Managed Thermostat (IMT) 350c/350w Installation Guide, Release 1.0
Part No. 600-03000-350, Rev. 1
lists the possible HVAC power configurations.
Installing and Wiring the Thermostat
Supplies...
W1, W2, Y1, G
RH supplies W1, W2, G; RC supplies Y1
RH supplies W1 and W2; RC supplies Y1 and G
13