Weight Stack Frame - Matrix VS-S70 Owner's Manual

STEP 1 | PREMIUM KIT ASSEMBLY INSTRUCTIONS & NOTES
Rep Counter - Magnet
1. Remove the (2) top cap covers using a flat
blade screw driver.
2. Remove the (4) M8 bolts and 20 mm diameter
washers that hold the top cap to the weight
stack frame.
Top cap covers, 20 mm diameter washers
& M8 fasteners can be discarded
3. Remove top cap and rear shroud.
4. Assemble the Repetition Counter magnet holder
to the headplate using the M5 X 12L bolt and M5
washer provided with the kit.
Holder must be mounted on thes
same side of the weight stack as Rep
Counter
ASSEMBLY
PART 8: PREMIUM KIT ASSEMBLY
21