Replacement Of Oxy-Pilot Assembly; Replacement Of Control Unit (Edb) - Infinity 880FL Owner's Manual

880 FL
Maintenance Instructions
SECTION TWELVE Maintenance Continued

REPLACEMENT OF OXY-PILOT ASSEMBLY

NOTE: If the pilot assembly is replaced it must be replaced by an identical unit from the same
manufacturer and replaced as a complete unit.

Follow the burner tray or basket removal sequence.
 Undo the compression nut on the supply pipe at the pilot.
 Carefully pull off the ignition lead.
 Disconnect the thermocouple at the end of the main control valve.
 Remove the cross headed nut holding the pilot to the chassis
 Carefully remove the pilot shield & oxy-pilot.
 Re-assemble in reverse order.

REPLACEMENT OF CONTROL UNIT (EDB)


Follow the burner tray or basket removal sequence.
 Disconnect leads from control unit and remove 2 bolts.
 Re-assemble in the reverse order.
 Turn on the gas supply, check for gas soundness and re-commission appliance.
29 LT6387 Iss 4 (05/14)