Table of Contents
Advertisement
2
Integrated antenna model wall mount instructions
Wall mount procedure
1. Orient the case on the wall by its width or length.
2. Using the arrows on one edge of the case as guides, move the edge to the
midline of the mounting area and mark points on the midline for the screws
3. At each point, drill a hole in the wall, insert an anchor, screw into the anchor the
wall mounting screw and stop when there is 1mm between the screw head and
the wall
8
CAUTION
To ensure proper operation of the Brocade Mobility 650 access point
ensure that the access point is mounted in the correct orientation with
the logo facing up.
Integrated Antenna Wall Mount
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
Advertisement
Table of Contents
