Table of Contents
Advertisement
Brocade Mobility 650 external antenna model antenna options
8. Fit the light pipe into hole in the tile from its unfinished side.
9. Attach any safety wire to the safety wire tie point or security cable to the unit's
lock port.
10. Bring the tile into the ceiling space.
11. Plug the Ethernet cable into the unit and to a switch with an
802.3af-compatible power source.
12. Verify the unit has power by observing the LEDs.
13. Place the ceiling tile back in its frame.
14. Snap the badge onto the light pipe from the finished side of the tile.
Brocade Mobility 650 external antenna model
antenna options
Brocade supports two antenna suites for Brocade Mobility 650 External Antenna
models. One antenna suite supporting the 2.4 GHz band and another antenna suite
supporting the 5 GHz band. Select an antenna model best suited to the intended
operational environment of your access point.
On single radio versions, the R-SMA connectors can support both bands and should
be connected to a R-SMA dual-band antenna or an appropriate single band
antenna.
The 2.4 GHz antenna suite includes the following models:
Part Number
ML-2499-HPA3-01R
ML-2499-SD3-01R
ML-2452-APA2-01
ML-2452-PNA5-01R
ML-2452-PTA3M3-036
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
Antenna Type
Omni-Directional Antenna
Patch Antenna
Dual-Band
Panel Antenna
Omni-Directional Antenna
2
15
Advertisement
Table of Contents
