External antenna model wall mount instructions
External antenna model wall mount instructions
Wall mounting requires hanging the Brocade Mobility 650 along its width or length
using the pair of slots on the bottom of the unit. Brocade Mobility 650 can be
mounted onto any plaster, wood, or cement wall surface using the provided wall
anchors when necessary. The illustration shows a lengthwise mount
Wall mount hardware
•
Two wide-shoulder Phillips pan head self-tapping screws
•
Two wall anchors
•
Safety wire (recommended) and security cable (optional)
NOTE
In the event that the original mounting screws are lost, the following screws can be
used instead: (ANSI Standard) #6-18 X 0.875in. Type A or AB Self-Tapping Screw, or
(ANSI Standard Metric) M3.5 X 0.6 X 20mm Type D Self-Tapping Screw.
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
2
11