Suspended Ceiling Mount Procedure - Brocade Communications Systems Mobility 650 Installation Manual

2
Integrated antenna model suspended ceiling T-bar mount instructions

Suspended ceiling mount procedure

1. If required, install and attach a security cable to the unit's lock port.
2. Plug the Ethernet cable into the unit and to a switch with an
802.3af-compatible power source.
3. Face the bottom of the T-bar with the back of the case.
4. Orient the case by its length and the length of the T-bar.
5. Rotate the case in place 45 degrees clockwise, or about 10 o'clock.
6. Push the back of the case onto the bottom of the T-bar.
7. Rotate the case 45 degrees counter-clockwise. The clips click as they fasten to
the T-bar.
8. Verify the unit has power by observing the LEDs.
10 Brocade Mobility 650 Access Point Installation Guide
53-1001934-02