Brocade Communications Systems Mobility 650 Installation Manual page 11

Brocade Mobility 650 package contents
•
Clips for mounting on a suspended ceiling T-bar
•
Lock port for Kensington® style Security Lock
The Brocade Mobility 650 has one RJ-45 connector supporting an 10/100/1000
Ethernet port and requires 802.3af-compliant power from an external source.
NOTE
When operating in a Gigabit Ethernet environment CAT-5e or CAT-6 cable is required
for Gigabit operation.
The Brocade Mobility 650 comes in both single and dual radio versions both
supporting 802.11a/b/g/n.
The Brocade Mobility 650 Access Point contains runtime firmware which enables
the unit to boot after either a power up or a watchdog reset. The runtime firmware
on the access point and the firmware downloaded from the switch can be updated
via the Ethernet interface from the Wireless Controller.
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
1
3