Radio Characteristics - Brocade Communications Systems Mobility 650 Installation Manual

Radio characteristics

Radio characteristics
The Brocade Mobility 650 access points have the following radio characteristics:
Operating channels
Data rates supported
Wireless medium
Network standards
Maximum available
transmit power
Transmit power
adjustment
Antenna configuration
Brocade Mobility 650 Access Point Installation Guide
53-1001934-02
All channels from 4920 MHz to 5825 MHz except channel 52 -64
Channels 1-13 (2412-2472 MHz)
Channel 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory approval for the
country of use.
802.11g: 1,2,5.5,11,6,9,12,18,24,36,48, and 54Mbps
802.11a: 6,9,12,18,24,36,48, and 54Mbps
802.11n: MCS 0-15 up to 300Mbps
Direct Sequence Spread Spectrum (DSSS),
Orthogonal Frequency Division Multiplexing (OFDM)
Spatial multiplexing (MIMO)
802.11a, 802.11b, 802.11g, 802.3, 802.11n (Draft 2.0)
Maximum available conducted transmit power per chain:
2.4 GHz: 21dBm
Maximum available conducted transmit power all chains:
2.4 GHz: 24dBm
Maximum available conducted transmit power per chain:
5 GHz: 19dBm
Maximum available conducted transmit power all chains:
5 GHz: 22dBm
1dB increments
2x3 MIMO (transmit on two and receive on all three
antennas)
3
19